<?xml version="1.0" encoding="UTF-8"?>
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9" xmlns:image="http://www.google.com/schemas/sitemap-image/1.1" xmlns:video="http://www.google.com/schemas/sitemap-video/1.1">
<url>
<loc>https://wirecora.com</loc>
</url>
<url>
<loc>https://wirecora.com/about</loc>
</url>
<url>
<loc>https://wirecora.com/contact</loc>
</url>
<url>
<loc>https://wirecora.com/privacy</loc>
</url>
<url>
<loc>https://wirecora.com/terms</loc>
</url>
<url>
<loc>https://wirecora.com/tools</loc>
<lastmod>2026-10-08</lastmod>
</url>
<url>
<loc>https://wirecora.com/tools/resistor-calculator</loc>
</url>
<url>
<loc>https://wirecora.com/tools/wiring-board</loc>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/tools/capacitor-code</loc>
<lastmod>2026-10-15T00:00:00.000Z</lastmod>
</url>
<url>
<loc>https://wirecora.com/tools/led-resistor</loc>
<lastmod>2026-10-15T00:00:00.000Z</lastmod>
</url>
<url>
<loc>https://wirecora.com/tools/ohms-law</loc>
<lastmod>2026-10-15T00:00:00.000Z</lastmod>
</url>
<url>
<loc>https://wirecora.com/tools/smd-resistor-code</loc>
<lastmod>2026-11-06T00:00:00.000Z</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits</loc>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/automatic-water-filling</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/water.webp</image:loc>
</image:image>
<video:video>
<video:title>Automatic Water Filling System | Solenoid Valve Timer</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/SyjBJR7oSfE/hqdefault.jpg</video:thumbnail_loc>
<video:description>Put a bottle under the tap: the sensor sees it, the timer relay closes, the solenoid valve opens and water runs. After the set time the relay lets go, the valve closes and the water stops.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/smart-bike-indicators</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/bike.webp</image:loc>
</image:image>
<video:video>
<video:title>Smart Bike Indicators | Arduino + MPU6050</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/y4g05mL5EEE/hqdefault.jpg</video:thumbnail_loc>
<video:description>Lean the bike to the left and the left half of the LED strip sweeps amber from the middle outwards. Lean right and the right half does. Straighten up and the strip goes dark.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/water-tank-filler-555</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/tank.webp</image:loc>
</image:image>
<video:video>
<video:title>Automatic Water Tank Filler Using 555 Timer</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/T7Jy082bmz4/hqdefault.jpg</video:thumbnail_loc>
<video:description>Water leaves the LOW probe: the 555 switches the pump on. Water reaches the HIGH probe: the pump stops. In between, the pump keeps doing what it was doing, so the tank fills from LOW to HIGH and then waits.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/speaker-crossover</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/speaker-crossover.webp</image:loc>
</image:image>
<video:video>
<video:title>3-Way Speaker Crossover Circuit</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/DrJEbbs2SZI/hqdefault.jpg</video:thumbnail_loc>
<video:description>A test tone sweeps from high to low. Sound waves appear on the tweeter first, then on the midrange, then on the woofer, because each speaker gets only the part of the sound its filter lets through.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/servo-gesture-control</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/servo-gesture-control.webp</image:loc>
</image:image>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/audio-amplifier</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/audio-amplifier.webp</image:loc>
</image:image>
<video:video>
<video:title>Simple Audio Amplifier Circuit | BC547 + Speaker</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/hEERwbmdLuo/hqdefault.jpg</video:thumbnail_loc>
<video:description>Music from a phone goes in at the AUX plug, one transistor and one cell drive the speaker, and the speaker plays the music quietly. In the video the cone pumps with the beat; a real small cone barely moves.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/water-level-indicator</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/water-level-indicator.webp</image:loc>
</image:image>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/ir-proximity-led-bar-v2</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/ir-proximity-led-bar.webp</image:loc>
</image:image>
<video:video>
<video:title>Hand Distance Sensor Lights a 10-LED Bar | LM3914</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/NFL0hnsEwFY/hqdefault.jpg</video:thumbnail_loc>
<video:description>Hold your hand over the two small sensors: the closer it gets, the more of the ten red LEDs light up, from the bottom of the bar to the top. Pull the hand away and the bar goes dark again.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/battery-charging-indicator-v2</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/battery-charging-indicator.webp</image:loc>
</image:image>
<video:video>
<video:title>18650 Charger Circuit with Full Indicator (TP4056)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/ZLZbQpzioks/hqdefault.jpg</video:thumbnail_loc>
<video:description>The charger is plugged in and the holder is empty, so the green Full LED is already lit. Drop an 18650 cell into the holder and the green LED goes out, the red Charging LED comes on and a counter climbs. When the cell is full the red LED goes out and the green Full LED lights again. Lift the cell out and the green LED stays on.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/bike-indicator-flasher</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/bike-indicator-flasher.webp</image:loc>
</image:image>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/automatic-water-tap</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/automatic-water-tap.webp</image:loc>
</image:image>
<video:video>
<video:title>Automatic Water Tap Circuit | IR Sensor + Solenoid Valve</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/JKjad5JxlZk/hqdefault.jpg</video:thumbnail_loc>
<video:description>Hold your hands under the tap: the IR sensor sees them, the relay clicks and water pours onto your hands. Take your hands away and the relay clicks off and the water stops.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/police-light-555</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/police-light-555.webp</image:loc>
</image:image>
<video:video>
<video:title>Police Lights Using 555 Timer</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/xOE7B54Q3cI/hqdefault.jpg</video:thumbnail_loc>
<video:description>A finger presses the rocker switch on. The three red LEDs light first, then the red and the blue LEDs take turns, about four swaps a second, like the lights on a police car. Press the switch off and everything goes dark.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/metal-detector</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/metal-detector.webp</image:loc>
</image:image>
<video:video>
<video:title>Metal Detector Circuit | CS209A IC</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/SZDNe9oG9wU/hqdefault.jpg</video:thumbnail_loc>
<video:description>Slide a kitchen knife onto the search coil and the red LED lights and the buzzer sounds. Take the knife away and both stop. Then a key goes onto the coil and the LED and buzzer come on again.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/pnp-transistor-tester</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/pnp-transistor-tester.webp</image:loc>
</image:image>
<video:video>
<video:title>Dead or Alive? BC557 PNP Checker with an LED</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/v4_VDjpoyrU/hqdefault.jpg</video:thumbnail_loc>
<video:description>Plug a BC557 into the C, B and E terminals and press TEST: if the transistor works, the green LED lights. Let go and the LED goes out. Pull the transistor out and nothing lights, even with TEST pressed.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/useless-box</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/useless-box.webp</image:loc>
</image:image>
<video:video>
<video:title>This Box Turns Itself Off Every Time | Arduino Useless Box</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/0zXyhjxmSnM/hqdefault.jpg</video:thumbnail_loc>
<video:description>Flip the switch ON and the box pushes its lid open, reaches out with a plastic arm and flips the switch straight back OFF, then hides again. The second time it is angry: the arm comes out at full speed, the lid slams, and a moment later the lid peeks up once.</video:description>
</video:video>
<lastmod>2026-10-22</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/clap-lamp</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/clap-lamp.webp</image:loc>
</image:image>
<video:video>
<video:title>Clap Once, Lamp On. Clap Again, Lamp Off. DIY Clap Switch</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Cw9DRsFCurE/hqdefault.jpg</video:thumbnail_loc>
<video:description>Clap once and the desk lamp turns on. Clap again and it turns off. A sound that comes less than about half a second after a clap is ignored, so the clap's own echo and the relay's click do not switch it back.</video:description>
</video:video>
<lastmod>2026-10-22</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/cat-door-magnet-tag</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/cat-door-magnet-tag.webp</image:loc>
</image:image>
<video:video>
<video:title>This Cat Door Only Opens for Your Cat's Magnet Tag | Arduino</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/8Ol7BenUFzw/hqdefault.jpg</video:thumbnail_loc>
<video:description>The cat walks up to the door. The magnet tag on its collar passes a reed switch in the sill, the green LED lights and a servo swings the flap up. Two seconds after the tag has gone the flap closes slowly and the red LED lights. A raccoon with no tag pushes its nose on the flap, and the flap stays locked.</video:description>
</video:video>
<lastmod>2026-10-22</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/plant-watering</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/plant-watering.webp</image:loc>
</image:image>
<video:video>
<video:title>This Plant Waters Itself When the Soil Dries | Arduino + Soil Sensor</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/KClvikj9jAk/hqdefault.jpg</video:thumbnail_loc>
<video:description>When the soil dries out, the screen reads DRY, a small pump in the water reservoir starts and water runs through a clear hose into the pot. The number on the screen climbs as the soil gets wet, the drooping leaves lift, and at 70 % the pump stops until the soil is dry again.</video:description>
</video:video>
<lastmod>2026-10-23</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/radar-guard</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/radar-guard.webp</image:loc>
</image:image>
<video:video>
<video:title>Arduino Radar Finds the Block, Locks On and Beeps | HC-SR04 + Servo</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/30cuaDP5dHE/hqdefault.jpg</video:thumbnail_loc>
<video:description>An ultrasonic sensor on a servo sweeps from side to side. Put something within 30 cm in front of it: the sweep stops on it, the LCD says WARNING! Object at 15 cm and the buzzer beeps three times. Move the object and the sensor follows it in 5 degree steps. Take it away and the screen says Area is Empty and the sweep starts again.</video:description>
</video:video>
<lastmod>2026-10-23</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/smart-dustbin</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/smart-dustbin.webp</image:loc>
</image:image>
<video:video>
<video:title>This Trash Can Opens Before You Touch It | Arduino + HC-SR04</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/nGuAxRpzk8o/hqdefault.jpg</video:thumbnail_loc>
<video:description>Bring a hand with rubbish within 20 cm of the sensor and the lid swings up by itself. Drop the rubbish in and take your hand away: one second later the lid closes, slower than it opened.</video:description>
</video:video>
<lastmod>2026-10-23</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/fingerprint-door-lock</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/fingerprint-door-lock.webp</image:loc>
</image:image>
<video:video>
<video:title>Fingerprint Unlocks This Little Door in Half a Second</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/4kmCo8HZUDE/hqdefault.jpg</video:thumbnail_loc>
<video:description>Touch the sensor's ring with an enrolled finger: about half a second later the ring turns blue, the relay clicks and the solenoid pulls its bolt back, so the little door swings open with a push. After 2.2 s the bolt springs out again. A finger the sensor does not know gets two red flashes on the ring and one short buzz, and the bolt stays in.</video:description>
</video:video>
<lastmod>2026-10-19</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/sun-patio-umbrella</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/sun-patio-umbrella.webp</image:loc>
</image:image>
<video:video>
<video:title>This Patio Umbrella Opens Itself When the Sun Comes Out</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Zqx2F8PpI4I/hqdefault.jpg</video:thumbnail_loc>
<video:description>A cloud slides off the sun: the light sensor on top of the pole sees it, the yellow SUN LED lights and a servo pushes the umbrella's runner up the pole, so the canopy opens and shades the chair. When a cloud covers the sun and the sky stays dark, the umbrella folds again, slower than it opened.</video:description>
</video:video>
<lastmod>2026-10-19</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/porch-auto-doorbell</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/porch-auto-doorbell.webp</image:loc>
</image:image>
<video:video>
<video:title>Hands Full? This Porch Rings the Doorbell for You</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/MCjakDqwW_8/hqdefault.jpg</video:thumbnail_loc>
<video:description>Walk up to the door with your hands full and you do not have to press anything. When you come within 60 cm of the sensor, the porch light comes on and the chime plays ding-dong, once. Stand there as long as you like: it does not ring again. When you leave, the light stays on for a moment, then fades out. After 3 s with nobody near, it is ready for the next visitor.</video:description>
</video:video>
<lastmod>2026-10-20</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/robot-eyes</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/robot-eyes.webp</image:loc>
</image:image>
<video:video>
<video:title>Arduino Robot Eyes React to Your Hand</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/HYRL-Dq3H6s/hqdefault.jpg</video:thumbnail_loc>
<video:description>A pair of robot eyes on a small screen watches your hand. Far away, the eyes look happy. Closer than 40 cm they turn worried, and closer than 15 cm they turn angry and shake. Take the hand away and they calm down again, back to happy. The distance in cm shows under the eyes.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/foot-switch-motor</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/foot-switch-motor.webp</image:loc>
</image:image>
<video:video>
<video:title>Step On The Pedal And The Motor Runs | Foot Switch With A 5V Relay</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/fQ80rjEG6Xk/hqdefault.jpg</video:thumbnail_loc>
<video:description>Step on the pedal and the 12 V motor runs and the green RUN lamp lights. Lift your foot and the motor coasts to a stop, and the lamp fades out as it slows. The pedal never carries the motor's current: it only switches the relay's coil, and the relay switches the motor.</video:description>
</video:video>
<lastmod>2026-10-17</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/delay-off-timer-555</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/delay-off-timer.webp</image:loc>
</image:image>
<video:video>
<video:title>Delay OFF Timer Using 555</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/OjGICxZX14M/hqdefault.jpg</video:thumbnail_loc>
<video:description>Press the button once: the 12 V lamp lights straight away, stays on for about 5 seconds and then switches itself off. Letting go of the button early changes nothing, and pressing it again while the lamp is on does not restart the time.</video:description>
</video:video>
<lastmod>2026-10-14</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/arduino-traffic-light</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/traffic-light.webp</image:loc>
</image:image>
<video:video>
<video:title>Working Traffic Light with Arduino Nano: Green, Yellow, Red</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/HoBMM_rmn18/hqdefault.jpg</video:thumbnail_loc>
<video:description>An Arduino Nano runs a small traffic light: green, then yellow, then red, then green again. On the road below, toy cars drive through on green, brake on yellow and queue at the stop line on red. When the light turns green they pull away one after another.</video:description>
</video:video>
<lastmod>2026-10-14</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/rain-clothes-cover</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/rain-clothes-cover.webp</image:loc>
</image:image>
<video:video>
<video:title>Rain Starts, the Cover Closes Over the Clothes by Itself (Arduino)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/I3-NPoB_sn0/hqdefault.jpg</video:thumbnail_loc>
<video:description>Rain starts to fall on the sensor plate and, within half a second, a servo swings a cover down flat over the clothes on the line. The rain lands on the cover, not on the washing. When the plate has stayed dry for a while, the cover lifts back up.</video:description>
</video:video>
<lastmod>2026-10-15</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/component-tester-v2</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/component-tester-v2.webp</image:loc>
</image:image>
<video:video>
<video:title>Beeps One Way Only: Diode + Fuse Tester | BC547</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/VhHeQCzypjg/hqdefault.jpg</video:thumbnail_loc>
<video:description>Touch the two probes to a wire, a good fuse, or a diode with its band towards the black probe: the buzzer beeps and the green LED lights. A blown fuse stays silent, and so does a diode the wrong way round. That is how you find which end of a diode is which: it beeps one way only.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/start-stop-latch</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/start-stop-latch.webp</image:loc>
</image:image>
<video:video>
<video:title>Press START once: this relay keeps the motor running until STOP</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/EE9LLjwP3BM/hqdefault.jpg</video:thumbnail_loc>
<video:description>Press the green START button once and let go: the relay clicks in and the motor keeps spinning its propeller. Press the red STOP button: the relay drops out and the propeller coasts to a stop. Let go of STOP and nothing starts again until you press START. Machine motor starters use the same start/stop latch; this one runs on a safe 5 V.</video:description>
</video:video>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/solar-tracker</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/solar-tracker.webp</image:loc>
</image:image>
<video:video>
<video:title>Solar Panel That Follows the Sun | Arduino Solar Tracker</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/ypN-Qt_FKEA/hqdefault.jpg</video:thumbnail_loc>
<video:description>As the sun crosses the sky, two light sensors tell an Arduino which side is brighter, and a servo turns a small solar panel to face the sun, a few degrees at a time. At sunset it goes back to the middle, ready to swing towards the next sunrise.</video:description>
</video:video>
<lastmod>2026-10-15</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/solar-power-bank</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/solar-power-bank.webp</image:loc>
</image:image>
<video:video>
<video:title>Solar Power Bank: Sunlight Charges Your Phone | TP4056 + 18650</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/FeePixlLxHM/hqdefault.jpg</video:thumbnail_loc>
<video:description>The sun shines on a small solar panel and slowly fills one 18650 lithium cell. Push the USB plug into the phone and the screen lights up: the cell, lifted to 5 V by a boost board, charges the phone. Pull the plug and the panel goes back to filling the cell. It is a top-up: one cell gives about a third of a phone charge.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/joystick-security-camera</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/joystick-security-camera.webp</image:loc>
</image:image>
<video:video>
<video:title>Joystick Moves a Security Camera: Pan and Tilt | Arduino</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/yDR_PU65Hb4/hqdefault.jpg</video:thumbnail_loc>
<video:description>Push the thumb stick and the camera's lens follows it: left, right, up and down. Let go and the stick springs back to the middle, and the camera looks straight ahead again. Two small servos turn the camera: one turns it left and right (pan), the other tips it up and down (tilt).</video:description>
</video:video>
<lastmod>2026-10-14</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/honey-jar-filler</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/honey-jar-filler.webp</image:loc>
</image:image>
<video:video>
<video:title>Arduino Scale Fills Every Honey Jar to 500 g by Itself</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/824btuSkdrA/hqdefault.jpg</video:thumbnail_loc>
<video:description>Set an empty jar on the scale and the honey gate opens by itself. A load cell weighs the jar while the honey runs in. The gate shuts about 5 g before 500 g, because the reading lags a little and the gate needs 0.2 s to close, so the jar ends within a few grams of 500 g (about 1 lb). Take the full jar off, set down the next empty one, and it starts again. It stops by weight, not by time: thick cold honey runs slower, but the scale still shuts the gate at the same weight.</video:description>
</video:video>
<lastmod>2026-10-20</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/candy-bowl-grabbing-hand</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/candy-bowl-grabbing-hand.webp</image:loc>
</image:image>
<video:video>
<video:title>Reach for the Candy, the Skeleton Hand Snaps at You | Arduino</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Nol0GNEhKTY/hqdefault.jpg</video:thumbnail_loc>
<video:description>Reach into the candy bowl and a skeleton hand swings down beside your fingers. It taps twice over the candy, then folds slowly back up and waits. It stops about 1 cm above the candy, next to the reaching hand, never on it. Pull the plug and it is just a candy bowl again.</video:description>
</video:video>
<lastmod>2026-10-24</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/take-one-candy-bowl</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/take-one-candy-bowl.webp</image:loc>
</image:image>
<video:video>
<video:title>Grab Too Much Halloween Candy and This Bowl Calls You Out</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/xBoUxeZoY-E/hqdefault.jpg</video:thumbnail_loc>
<video:description>The bowl weighs its own candy. Take one bar and nothing happens. Grab a fistful and the light bar under the bowl flashes red, the screen says ONLY ONE! and a skeleton arm throws up a sign. Put the extras back: the count on the screen drops with every bar, and at one bar the light turns green, the screen says THANK YOU and the arm folds down. A second later the bowl counts again from its new weight.</video:description>
</video:video>
<lastmod>2026-10-25</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/step-pad-reaper-scare</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/step-pad-reaper-scare.webp</image:loc>
</image:image>
<video:video>
<video:title>This Porch Reaper Lunges When Trick-or-Treaters Step on the Mat</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/nf77uQPz80c/hqdefault.jpg</video:thumbnail_loc>
<video:description>Step on the STEP HERE mat and the hooded reaper by the door lunges at you twice with glowing red eyes, then leans back and waits for the next visitor. A 555 timer and a gear motor do it all: there is no code and no microcontroller.</video:description>
</video:video>
<lastmod>2026-10-24</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/spider-drop-doorbell</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/spider-drop-doorbell.webp</image:loc>
</image:image>
<video:video>
<video:title>Ring This Doorbell and a Spider Drops on Your Hand</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/0dcw6BngSIk/hqdefault.jpg</video:thumbnail_loc>
<video:description>Press the doorbell and a big rubber spider drops 10 cm onto the finger that rang it, bobs on its elastic line, then climbs back up in three tugs and parks at exactly the same spot, ready for the next trick-or-treater. It drops once per press and only for whoever rings, not for every passer-by.</video:description>
</video:video>
<lastmod>2026-10-25</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/flying-ghost-yard</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/flying-ghost-yard.webp</image:loc>
</image:image>
<video:video>
<video:title>Walk Up the Path and a Ghost Flies Right Over Your Head</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/fjRm0UhigOk/hqdefault.jpg</video:thumbnail_loc>
<video:description>A trick-or-treater walks up the path, a motion sensor sees them, and a white cloth ghost launches from beside the porch, swoops across the yard right over their head, flies one lap of a fishing-line loop and parks itself back in its hiding spot, ready for the next visitor. One lap per visitor, and it always stops in the same place.</video:description>
</video:video>
<lastmod>2026-10-24</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/rain-wiper-car</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/rain-wiper-car.webp</image:loc>
</image:image>
<video:video>
<video:title>Arduino Wiper Starts by Itself and Wipes Faster in Heavy Rain</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/mrlS6Ykon4I/hqdefault.jpg</video:thumbnail_loc>
<video:description>The first drops land on a small rain plate on the glass and the wiper starts by itself. When the rain gets heavy it wipes faster with no pause. When the rain eases it slows down again, and once the plate is dry the blade goes back to rest along the bottom of the glass.</video:description>
</video:video>
<lastmod>2026-10-22</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/crawling-porch-zombie</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/crawling-porch-zombie.webp</image:loc>
</image:image>
<video:video>
<video:title>Walk Up to This Porch and a Zombie Lunges at Your Feet</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/phau8Cu94jI/hqdefault.jpg</video:thumbnail_loc>
<video:description>A trick-or-treater walks onto the porch and the legless zombie by the railing lunges at their feet, claw first, slides back and lunges again, then parks in exactly the same spot for the next visitor. A motion sensor, two transistors and a MOSFET run it: there is no code and no microcontroller.</video:description>
</video:video>
<lastmod>2026-10-25</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/esp32-phone-smart-home</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/esp32-phone-smart-home.webp</image:loc>
</image:image>
<video:video>
<video:title>Tap My Phone: Desk Lamp, Fan and Shelf Lights Turn On</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/gU6SRm7GA3w/hqdefault.jpg</video:thumbnail_loc>
<video:description>Tap Lamp on your phone and the desk lamp comes on with a relay click. Tap Fan and the desk fan spins up, tap Lights and the LED strip under the shelf glows, tap All off and the whole desk goes dark. The page on the phone is served by the ESP32 itself on your home Wi-Fi: no app, no cloud, no account, and it keeps working when the internet is down.</video:description>
</video:video>
<lastmod>2026-10-21</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/stair-light-wave</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/stair-light-wave.webp</image:loc>
</image:image>
<video:video>
<video:title>Stairs That Light Up Step by Step as You Walk Up</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/dY-cEM_fNKI/hqdefault.jpg</video:thumbnail_loc>
<video:description>Walk up to the bottom step and the stair lights up one step after another, ahead of you, all the way to the top. Leave at the top and the steps fade out behind you in the same order, a little slower. Coming down from the top works the same way in reverse.</video:description>
</video:video>
<lastmod>2026-10-23</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/keypad-safe</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/keypad-safe.webp</image:loc>
</image:image>
<video:video>
<video:title>Wrong Code Buzzes, Right Code Swings the Door Open</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/kKug-ElxWaY/hqdefault.jpg</video:thumbnail_loc>
<video:description>Type a wrong four-digit code and the screen says WRONG CODE, the buzzer buzzes and the backlight blinks. Type 4-7-8-9 and the screen says OPEN, a servo under the hinge swings the little door 75 degrees open, and 1.2 s later it closes it again slowly. A reed switch on the frame tells the Arduino the door is really shut, and the screen says CLOSED. Three wrong codes in a row lock the keypad for 30 s. It is a code door, not a lock: see below.</video:description>
</video:video>
<lastmod>2026-10-22</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/flapping-bat-porch</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/flapping-bat-porch.webp</image:loc>
</image:image>
<video:video>
<video:title>This Porch Bat Flaps Its Wings When Kids Walk Up</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/xs5BRbncZu8/hqdefault.jpg</video:thumbnail_loc>
<video:description>Trick-or-treaters walk up to the door, a motion sensor sees them, and the big bat under the porch roof lights its red eyes and beats its wings, about two a second. A few seconds later it folds its wings neatly and waits for the next group. There is no Arduino and no code: the sensor's own timer, one transistor and a switch on the crank do it all, on four AA cells.</video:description>
</video:video>
<lastmod>2026-10-24</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/garage-door-car</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/garage-door-car.webp</image:loc>
</image:image>
<video:video>
<video:title>This Garage Door Opens When Your Car Pulls Up</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Is3IeeKelb0/hqdefault.jpg</video:thumbnail_loc>
<video:description>A car rolls up the driveway. When it is closer than 150 cm the roller door opens by itself and stops at the top. The car drives in past an IR sensor in the doorway, and 0.6 s after it has passed, the door rolls down and stops on the floor. If anything is in the doorway while it closes, it opens again. It is a 1:10 model on 12 V, not a real garage door.</video:description>
</video:video>
<lastmod>2026-10-21</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/jack-in-the-box-porch</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/jack-in-the-box-porch.webp</image:loc>
</image:image>
<video:video>
<video:title>Hold Out Your Candy Pail and This Jack-in-the-Box Pops Out</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/mXt19lrOqfA/hqdefault.jpg</video:thumbnail_loc>
<video:description>Hold your trick-or-treat pail out to the box. When it comes within 20 cm, the crank on the side turns once, the lid flies open and a clown springs up about 24 cm, bobbing on its spring neck. About 3 seconds later it folds back in slowly, the lid drops shut on top of it, and once nothing has been near for a second it waits for the next kid.</video:description>
</video:video>
<lastmod>2026-10-25</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/egg-incubator-turner</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/egg-incubator-turner.webp</image:loc>
</image:image>
<video:video>
<video:title>Arduino Box Keeps 12 Eggs at 99.5 °F Until They Hatch</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/P0Mn2-EmDcc/hqdefault.jpg</video:thumbnail_loc>
<video:description>A box that hatches chicken eggs. An Arduino Nano keeps the air at 37.5 °C (99.5 °F) by switching a 12 V bulb on and off, a fan mixes the warm air, and a servo tilts the tray of twelve eggs 45 degrees one way, then two hours later the other way. From day 18 the tray stays level and still, as hatching guides ask, and around day 21 the chicks break out. A small screen shows °C, °F, humidity and the day.</video:description>
</video:video>
<lastmod>2026-10-23</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/door-servo-light-switch</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/door-servo-light-switch.webp</image:loc>
</image:image>
<video:video>
<video:title>Open the Door and a Little Servo Flips the Light Switch</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/-t6zoBmJoJg/hqdefault.jpg</video:thumbnail_loc>
<video:description>You come in from the garage with a grocery bag in each hand and no hand free for the switch. As the door opens, a servo stuck beside the wall switch presses the top of the rocker and the hall light comes on before you are through the door. A while after the door has shut, the servo presses the bottom of the rocker and the light goes off. Nothing behind the switch plate is touched, and the switch still works by hand.</video:description>
</video:video>
<lastmod>2026-10-25</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/treadmill-safety-key-stop</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/treadmill-safety-key-stop.webp</image:loc>
</image:image>
<video:video>
<video:title>Why Your Treadmill Has a Magnet Clip: It Stops the Belt</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/JntAi8AA-f8/hqdefault.jpg</video:thumbnail_loc>
<video:description>A runner jogs on a small model treadmill with a red magnet key clipped from their top to the console. They stumble back, the cord pulls the key off and the belt coasts to a stop within about a third of a second. Clip the key back on and nothing moves until you press START; then the belt runs again. Many home treadmills use the same idea: a magnet in the key and a switch behind the dock. This one is a 5 V model, not a real treadmill.</video:description>
</video:video>
<lastmod>2026-10-28</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/coin-eating-robot-bank</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/coin-eating-robot-bank.webp</image:loc>
</image:image>
<video:video>
<video:title>This Robot Eats Your Coins and Counts Every One</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/mC-LOG6qyRM/hqdefault.jpg</video:thumbnail_loc>
<video:description>Set a coin on the robot's scoop. Its eyes light up and the little screen wakes, the arm swings the coin up to its mouth, the jaw flap snaps, the coin drops into its clear belly and the count goes up by one. The arm swings back slowly, the eyes go out and the screen sleeps until the next coin. The count is saved, so it is still there after you switch it off.</video:description>
</video:video>
<lastmod>2026-10-27</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/helmet-brake-light</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/helmet-brake-light.webp</image:loc>
</image:image>
<video:video>
<video:title>This Helmet Light Turns Bright Red When You Brake</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/RdGYD9jFwn0/hqdefault.jpg</video:thumbnail_loc>
<video:description>While you ride, the light bar on the back of your helmet glows a soft red. Squeeze the brakes and it jumps to bright red within about a quarter of a second, so the driver behind sees you slowing down. When you stop slowing it stays bright 0.6 s longer, then settles back to the glow. A pothole bump or a climb does not set it off.</video:description>
</video:video>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/tv-too-close-switch-off</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/tv-too-close-switch-off.webp</image:loc>
</image:image>
<video:video>
<video:title>Sit Too Close and the TV Turns Itself Off</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/xEX49qmPZA0/hqdefault.jpg</video:thumbnail_loc>
<video:description>A child scoots up close to the cartoon: the relay clicks and the TV screen goes black. The child moves back and the show comes on again by itself. An ultrasonic sensor under the TV measures the distance about 16 times a second; the TV goes off under 40 cm and comes back on over 55 cm.</video:description>
</video:video>
<lastmod>2026-10-27</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/spirit-board-answers</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/spirit-board-answers.webp</image:loc>
</image:image>
<video:video>
<video:title>Press ASK and the Spirit Board Answers YES</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/vnt5GB8e6WE/hqdefault.jpg</video:thumbnail_loc>
<video:description>Everyone rests a fingertip on the planchette and nothing happens. Press ASK: the candle shivers, everyone lets go, and the planchette glides by itself to YES. A moment later it slides on past NO to GOODBYE, then goes home to the question mark. The trick: under the board a servo swings a 15 cm arm with a strong magnet at its tip, and a steel washer glued under the planchette follows the magnet through the wood.</video:description>
</video:video>
<lastmod>2026-10-28</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/skeleton-head-follows-you</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/skeleton-head-follows-you.webp</image:loc>
</image:image>
<video:video>
<video:title>Skeleton Head Turns to Look at You (Arduino + 2 PIR sensors)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Z2qeeuJMUTw/hqdefault.jpg</video:thumbnail_loc>
<video:description>A trick-or-treater walks up on one side of the path and the giant skeleton's skull turns to look straight at them, the jaw clacks three times and the eyes glow red. A second kid on the other side gets the same. 2.5 seconds after the last new trigger the head turns back to the front, even if that sensor still sees the kid. It looks to one of two fixed sides, left or right: a PIR sensor only knows that something moved, so it does not follow you step by step.</video:description>
</video:video>
<lastmod>2026-10-24</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/dog-bowl-refills-itself</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/dog-bowl-refills-itself.webp</image:loc>
</image:image>
<video:video>
<video:title>Your Dog's Water Bowl Refills Itself</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/HweXwRXodik/hqdefault.jpg</video:thumbnail_loc>
<video:description>The dog drinks the bowl down. When the water drops to the LOW mark, a small pump in a water jug switches on and pours water into the bowl through a clear tube. When the water reaches the HIGH mark, the pump stops by itself and FULL shows. It does not start again until the bowl has dropped to LOW once more, so it never flickers on and off while the dog laps. No code and no microcontroller: one 555 chip does the remembering.</video:description>
</video:video>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/candy-launcher-driveway</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/candy-launcher-driveway.webp</image:loc>
</image:image>
<video:video>
<video:title>Raise Your Bucket and the Driveway Launcher Lobs Candy In</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/xxyE3dDceuc/hqdefault.jpg</video:thumbnail_loc>
<video:description>A trick-or-treater at the curb holds up a bucket. The sensor on the launcher's post sees it closer than 150 cm, two small flywheels whir up, and a servo pushes one wrapped chew at a time into them: two chews lob up and drop into the bucket, about 1.2 m away. Then the wheels coast down, and it fires again only after nothing has been in front of it for 2 seconds, so each bucket gets one pair.</video:description>
</video:video>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/self-pouring-cauldron</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/self-pouring-cauldron.webp</image:loc>
</image:image>
<video:video>
<video:title>Walk Past the Window and the Cauldron Pours Itself</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/i365RHhQt78/hqdefault.jpg</video:thumbnail_loc>
<video:description>The Halloween window stays dark until a trick-or-treater leans in to look. A motion sensor outside the glass sees them, the water in the cauldron lights up green, and a potion bottle hanging in mid-air starts pouring an endless stream into it. About 3 seconds later it stops by itself and waits for the next face at the glass. The trick: a clear tube hidden inside the stream holds the bottle, and a small pump in the cauldron pushes the same water up it again and again. There is no Arduino and no code: the sensor's own timer and one transistor do it all, on four AA cells.</video:description>
</video:video>
<lastmod>2026-10-27</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/garage-flood-barrier</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/garage-flood-barrier.webp</image:loc>
</image:image>
<video:video>
<video:title>Water Hits the Driveway, the Flood Gate Rises by Itself</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/VJNSFHzhQuo/hqdefault.jpg</video:thumbnail_loc>
<video:description>When rainwater overflows the drain and reaches two screws on the garage sill, a buzzer beeps once and a servo swings a flat panel up across the doorway in 0.3 s. The water piles against the panel and the floor inside stays dry. When the screws have been dry for one second, the panel folds slowly back down.</video:description>
</video:video>
<lastmod>2026-10-28</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/garden-sprinkler-raccoon</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/garden-sprinkler-raccoon.webp</image:loc>
</image:image>
<video:video>
<video:title>A Raccoon Sneaks Into the Garden and a Water Jet Chases It Out</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/dOIJnDfeYLY/hqdefault.jpg</video:thumbnail_loc>
<video:description>At night, when something warm moves in front of the sensor, the valve opens and a water-driven sprinkler head sweeps the garden bed for 3 seconds. Then the valve shuts and the circuit waits 2.5 seconds before it can fire again. In daylight it does nothing, because the light sensor says it is not dark.</video:description>
</video:video>
<lastmod>2026-10-29</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/servo-follows-knob</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/servo-follows-knob.webp</image:loc>
</image:image>
<video:video>
<video:title>🎛️ Turn the Knob, the Servo Follows | Arduino Uno + SG90</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/O6sXfGoq2U0/hqdefault.jpg</video:thumbnail_loc>
<video:description>Turn the knob and the servo arm follows. A 10 k potentiometer gives the Arduino Uno a voltage on A0; the sketch turns that reading (0 to 1023) into an angle (0 to 180 degrees) and sends it to an SG90 servo on D9. In the Short the knob stops at readings of 259, 429, 594 and 764, which the sketch turns into 45, 75, 104 and 134 degrees.</video:description>
</video:video>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/self-leveling-gimbal</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/self-leveling-gimbal.webp</image:loc>
</image:image>
<video:video>
<video:title>🎥 One-Axis Self-Leveling Gimbal with Arduino and MPU6050</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/3QsA9znaOfQ/hqdefault.jpg</video:thumbnail_loc>
<video:description>A hand tilts the handle 25 degrees left and right. The MPU6050 on the handle feels the tilt, the Arduino turns the SG90 servo back by the same angle, and the platform on the servo stays level.</video:description>
</video:video>
<lastmod>2026-10-17</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/bluetooth-speaker-18650</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/bluetooth-speaker-18650.webp</image:loc>
</image:image>
<video:video>
<video:title>🔊 Mini Bluetooth Speaker from One 18650 Cell (no boost board)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/vzSV7FehQqs/hqdefault.jpg</video:thumbnail_loc>
<video:description>A Bluetooth amplifier board plays music from a phone through two speakers, powered by one 18650 Li-ion cell through a TP4056 charge and protection board. Turning the volume knob makes it louder or silent. There is no boost converter: the amplifier chip runs straight from the cell.</video:description>
</video:video>
<lastmod>2026-10-20</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/pet-feeder-walk-up</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/pet-feeder-walk-up.webp</image:loc>
</image:image>
<video:video>
<video:title>🐶 Automatic Pet Feeder: Food Drops When Your Pet Walks Up | Arduino</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/-5h2RoqMswE/hqdefault.jpg</video:thumbnail_loc>
<video:description>A dog, then a cat, walk up to the bowl. An infrared sensor sees the head, and the Arduino Nano swings a servo flap open to drop one portion of food, then closes it. One portion per visit.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/wind-turbine-lights-led</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/wind-turbine-lights-led.webp</image:loc>
</image:image>
<video:video>
<video:title>💨 Mini Wind Turbine Lights an LED</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/epRxta9AsJ0/hqdefault.jpg</video:thumbnail_loc>
<video:description>A 12 V fan blows on a propeller fixed to a small DC motor. The motor works as a generator and lights a red LED through a 100 ohm resistor, while a meter reads about 2.1 V. A toggle switches the fan on and off.</video:description>
</video:video>
<lastmod>2026-10-18</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/heat-fan-turns-on-when-hot</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/heat-fan-turns-on-when-hot.webp</image:loc>
</image:image>
<video:video>
<video:title>🌡️ Fan That Turns On By Itself When It Gets Hot</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/cRzPOlddXt0/hqdefault.jpg</video:thumbnail_loc>
<video:description>A hair dryer warms a 10k NTC thermistor. When the thermistor gets hot enough, an IRFZ44N MOSFET switches the fan on; when the thermistor cools down again, the fan stops. It is an on/off switch at about 43 C for a typical part, not a speed control.</video:description>
</video:video>
<lastmod>2026-10-17</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/car-horn-relay-button</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/car-horn-relay-button.webp</image:loc>
</image:image>
<video:video>
<video:title>🚗 How a Small Button Sounds Two Loud Car Horns (Relay Wiring)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/yl1l1IrkJw8/hqdefault.jpg</video:thumbnail_loc>
<video:description>Press the horn button and a 12 V relay clicks in, so both horns sound. The button carries only the relay coil's current, about 30 mA. The relay contact carries the horns' current, about 7 A.</video:description>
</video:video>
<lastmod>2026-10-19</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/alcohol-sensor-engine-lock</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/alcohol-sensor-engine-lock.webp</image:loc>
</image:image>
<video:video>
<video:title>🚗 Alcohol Sensor Locks the Engine (Arduino Demo)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/uLFHjSlW-00/hqdefault.jpg</video:thumbnail_loc>
<video:description>An Arduino reads an MQ-3 alcohol sensor. When a glass of whisky comes near, a relay drops, the small gear motor (the engine) coasts to a stop, a buzzer beeps three times and ENGINE LOCKED lights up. When the vapour clears, the relay pulls in and the motor runs again.</video:description>
</video:video>
<lastmod>2026-10-20</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/solar-automatic-night-light</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/solar-automatic-night-light.webp</image:loc>
</image:image>
<video:video>
<video:title>🌙 Automatic Solar Night Light | TP4056 + BC557 + 18650</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/CiIXlzBy9Sw/hqdefault.jpg</video:thumbnail_loc>
<video:description>A 6 V solar panel charges an 18650 cell through a TP4056 module all day. At sunset three white LEDs switch on by themselves, and at sunrise they switch off. The panel is also the light sensor.</video:description>
</video:video>
<lastmod>2026-10-18</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/smoke-sensor-exhaust-fan</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/smoke-sensor-exhaust-fan.webp</image:loc>
</image:image>
<video:video>
<video:title>💨 This Fan Turns On by Itself When It Smells Smoke | Arduino MQ-2</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/H77AwBrziZ0/hqdefault.jpg</video:thumbnail_loc>
<video:description>A frying pan starts to smoke. An MQ-2 gas and smoke sensor notices it, a relay clicks and a 12 V fan pulls the smoke away. When the air is clear again the fan stops.</video:description>
</video:video>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/six-key-555-piano</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/six-key-555-piano.webp</image:loc>
</image:image>
<video:video>
<video:title>🎹 DIY Electronic Piano | NE555 Timer, 6 Notes</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/rTxi4CKwraI/hqdefault.jpg</video:thumbnail_loc>
<video:description>Press a key and the speaker sings a note. Each of the six push buttons connects its own resistor into the timing network of an NE555 timer, so every key sets a different pitch: C4 262 Hz, D4 296 Hz, E4 333 Hz, F4 352 Hz, G4 398 Hz, A4 446 Hz. With no key pressed the speaker is silent.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/two-slider-robot-arm</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/two-slider-robot-arm.webp</image:loc>
</image:image>
<video:video>
<video:title>🦾 DIY Robotic Arm with Arduino and Two Sliders</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/oqjbt2gV4gc/hqdefault.jpg</video:thumbnail_loc>
<video:description>Slide one knob and the shoulder servo turns, slide the other and the elbow servo turns. The two-joint arm follows your hand until its gripper taps a desk bell.</video:description>
</video:video>
<lastmod>2026-10-21</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/wet-dry-waste-sorter</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/wet-dry-waste-sorter.webp</image:loc>
</image:image>
<video:video>
<video:title>♻️ Automatic Waste Separator: wet goes right, dry goes left</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/9yYrBgysGTQ/hqdefault.jpg</video:thumbnail_loc>
<video:description>A dry plastic bottle tips into the DRY bin, a damp banana peel into the WET bin. An IR sensor sees that something landed on the tray, a soil-moisture fork decides wet or dry, and one SG90 servo tips the tray 35 degrees to the right (wet) or to the left (dry), then levels it again.</video:description>
</video:video>
<lastmod>2026-10-18</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/knob-drone-motor</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/knob-drone-motor.webp</image:loc>
</image:image>
<video:video>
<video:title>🚁 Turn a Knob, Spin Up a Drone Motor (Arduino + ESC)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Lu1gY74sVYE/hqdefault.jpg</video:thumbnail_loc>
<video:description>Turn a knob and a drone motor's propeller speeds up from 0 to 100 % throttle, then slows back down.</video:description>
</video:video>
<lastmod>2026-10-19</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/pwm-motor-speed-555</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/pwm-motor-speed-555.webp</image:loc>
</image:image>
<video:video>
<video:title>🌀 555 PWM Motor Speed Controller | TIP122</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/BI3wI7NJuWo/hqdefault.jpg</video:thumbnail_loc>
<video:description>A 555 timer makes the PWM that sets the speed of a small 12 V DC motor. Turn the 100 kohm pot and the duty cycle follows the knob, about 1 % to 99 %, while the frequency stays about constant at 127 to 132 Hz. The TIP122 switches the motor on for a longer or shorter part of every cycle, so the fan speeds up or slows down.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/led-flasher-adjustable-speed</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/led-flasher-adjustable-speed.webp</image:loc>
</image:image>
<video:video>
<video:title>💡 LED Flasher with Adjustable Speed (2 Transistors)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/y0mRZ7OhLlw/hqdefault.jpg</video:thumbnail_loc>
<video:description>Two LEDs, one green and one red, take turns: exactly one is lit at a time and they swap again and again. Turn the knob clockwise and they swap faster, turn it back and they slow down. In the Short the swapping runs at about 1.6 times a second with the knob fully clockwise and about 0.6 times a second fully counter-clockwise.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/laser-tripwire-alarm</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/laser-tripwire-alarm.webp</image:loc>
</image:image>
<video:video>
<video:title>🚨 Laser Tripwire Alarm | Hand or Car Trips It</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/57-DHCCM2-Y/hqdefault.jpg</video:thumbnail_loc>
<video:description>A red laser shines on a light sensor and the buzzer stays quiet. Put a hand or a toy car in the beam and the buzzer sounds. Take it away and the buzzer goes quiet again.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/ntc-fan-controller</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/ntc-fan-controller.webp</image:loc>
</image:image>
<video:video>
<video:title>🌡️ Automatic Fan Controller | NTC Thermistor + LM358</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/mK79WASk22E/hqdefault.jpg</video:thumbnail_loc>
<video:description>Touch the thermistor with something hot and the fan starts. Take the heat away and the fan stops again. A 100 k NTC thermistor tells an LM358 chip how warm it is, the LM358 switches a BC547 transistor, and the transistor pulls in a relay that connects a 12 V fan.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/vehicle-speed-detector</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/vehicle-speed-detector.webp</image:loc>
</image:image>
<video:video>
<video:title>🚗 Vehicle Speed Detector with Arduino</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/W2vGKQyeSkg/hqdefault.jpg</video:thumbnail_loc>
<video:description>A car drives past two IR sensors that stand 1 metre apart. The Arduino Nano times how long the car takes to get from the first sensor to the second and shows the speed on a 16x2 LCD. A slow car gets "Normal speed". A car over 100 km/h gets "Over speeding!" and the buzzer beeps.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/stepper-motor-flip-reverse</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/stepper-motor-flip-reverse.webp</image:loc>
</image:image>
<video:video>
<video:title>🔄 Control Stepper Motor with Arduino | Flip to Reverse</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/6l3jFQ3H6kw/hqdefault.jpg</video:thumbnail_loc>
<video:description>Flip the toggle switch and the stepper motor turns the other way. An Arduino Uno steps a 28BYJ-48 motor through a ULN2003 driver board, and a switch on pin D2 tells the sketch which way to go. Flip the switch back and the motor turns the first way again.</video:description>
</video:video>
<lastmod>2026-10-14</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/motion-sensing-window</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/motion-sensing-window.webp</image:loc>
</image:image>
<video:video>
<video:title>🪟 Arduino Motion Sensing Window (PIR + Servo Model)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/aYuEM4h2NzM/hqdefault.jpg</video:thumbnail_loc>
<video:description>Wave a hand past the PIR sensor and the model window slides open. The PIR sensor sees the warm hand and its output goes high, the Arduino Nano sees that on D2 and turns an SG90 servo from 30 to 150 degrees, and a crank and rod push the sash open. About 3 seconds after the sensor's output falls the servo turns back and the window closes again.</video:description>
</video:video>
<lastmod>2026-10-20</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/battery-level-indicator-lm339</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/battery-level-indicator-lm339.webp</image:loc>
</image:image>
<video:video>
<video:title>🔋 12V Battery Level Indicator | LM339 Circuit</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/y_ocvlOfo8A/hqdefault.jpg</video:thumbnail_loc>
<video:description>The battery's voltage falls and the four LEDs go out from the top: green (100 %) first, then yellow, blue and red (25 %). When the voltage rises again they light from the bottom up, red first. An LM339 chip compares four slices of the battery voltage with a steady 5.1 V and switches one LED for each. In the Short the number beside the battery drops from 12.8 V to 11.6 V and back.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/floor-mop-robot</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/floor-mop-robot.webp</image:loc>
</image:image>
<video:video>
<video:title>🧹 This Little Robot Mops the Floor and Turns Before the Wall</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/QuQXge1IqQE/hqdefault.jpg</video:thumbnail_loc>
<video:description>The robot drives over a hard floor, mists a little water and wipes it with a cloth pad. When the wall in front of it is closer than 15 cm, it stops, backs up, turns 90 degrees, steps one lane over and turns again. Then it mops the next stripe back the other way.</video:description>
</video:video>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/smart-parking-ir-leds</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/smart-parking-ir-leds.webp</image:loc>
</image:image>
<video:video>
<video:title>🚗 Smart Parking System with IR Sensor and 2 LEDs</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/6-ttantExIM/hqdefault.jpg</video:thumbnail_loc>
<video:description>Drive the toy car into the bay and the red FULL LED lights while the green FREE LED goes dark. An FC-51 IR obstacle module watches the end of the bay and pulls its OUT pin low when the car comes within about 4 cm. Two transistors turn that one signal into exactly one lit LED. When the car backs out, green FREE lights again.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/staircase-light-two-switches</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/staircase-light-two-switches.webp</image:loc>
</image:image>
<video:video>
<video:title>💡 Staircase Light: 2 Switches, 1 Lamp</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/vfOdtt6-a0c/hqdefault.jpg</video:thumbnail_loc>
<video:description>Flip either of two switches and the lamp changes: on becomes off, off becomes on. In the Short two hands flip the levers of a switch at the bottom of a staircase and a switch at the top in turn, and each flip changes the lamp. This is the two-way (staircase) circuit, built here at 12 V.</video:description>
</video:video>
<lastmod>2026-10-21</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/glass-fills-stops-at-top</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/glass-fills-stops-at-top.webp</image:loc>
</image:image>
<video:video>
<video:title>💧 Press Once: The Glass Fills Itself and Stops Near the Top | NE555</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/_CLm6nh-vXA/hqdefault.jpg</video:thumbnail_loc>
<video:description>Press START once and a small pump fills the glass. When the water reaches two steel rods near the top, the pump cuts out by itself. Drink the glass and nothing restarts; it waits for the next press.</video:description>
</video:video>
<lastmod>2026-11-03</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/dino-game-tapper</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/dino-game-tapper.webp</image:loc>
</image:image>
<video:video>
<video:title>🦖 No Arduino: This Solenoid Plays the Dino Game by Itself</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/1pJyLh0wfk4/hqdefault.jpg</video:thumbnail_loc>
<video:description>A light sensor stuck on a laptop screen watches for a dark cactus sliding toward the dinosaur. When the cactus covers the sensor, a plunger taps the space bar and the dinosaur jumps. No Arduino and no code run here: one transistor does it all.</video:description>
</video:video>
<lastmod>2026-11-04</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/hazard-flasher-no-chip</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/hazard-flasher-no-chip.webp</image:loc>
</image:image>
<video:video>
<video:title>🚨 No Chip Inside: What Makes Your Hazard Lights Blink</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/LZbM_1b5dOI/hqdefault.jpg</video:thumbnail_loc>
<video:description>Two amber car bulbs blink on their own with the familiar click-clack. A press on the red triangle stops them, and a second press starts them again after a short pause. There is no chip, no transistor and no relay: the silver can is a thermal flasher.</video:description>
</video:video>
<lastmod>2026-11-07</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/litter-box-self-clean</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/litter-box-self-clean.webp</image:loc>
</image:image>
<video:video>
<video:title>🐈 Self-Cleaning Litter Box Turns When the Cat Leaves | Arduino</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/it3i6WiJEp4/hqdefault.jpg</video:thumbnail_loc>
<video:description>When the cat has been out of the drum for seven minutes, an Arduino Nano turns the drum half a turn. The litter pours through a sieve and the clumps drop out of a port into a drawer, then the drum rolls back level. While the IR sensor sees the cat, the drum stays locked, and if the cat comes back mid-turn the motor stops.</video:description>
</video:video>
<lastmod>2026-11-01</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/snow-blower-robot</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/snow-blower-robot.webp</image:loc>
</image:image>
<video:video>
<video:title>❄️ This Little Robot Clears the Snow and Stops for the Dog</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/8WRoxSLHDb4/hqdefault.jpg</video:thumbnail_loc>
<video:description>A small robot snow blower clears a driveway, stops dead when a dog runs into its lane, and drives on once the dog is gone. An Arduino Nano watches an ultrasonic sensor at the front and stops the wheels and the rotor when something is closer than 40 cm.</video:description>
</video:video>
<lastmod>2026-11-02</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/water-switch-motor</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/water-switch-motor.webp</image:loc>
</image:image>
<video:video>
<video:title>💧 Water Touches Two Rods and This Propeller Starts | TIP120</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/9KPm_KBQnZs/hqdefault.jpg</video:thumbnail_loc>
<video:description>Two steel rods stand in a tank. When the water reaches them, a small motor with a yellow propeller starts. When the water drops away from the rods, the motor slows and stops. There is no switch in this circuit; the water itself connects the two rods.</video:description>
</video:video>
<lastmod>2026-11-05</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/speaker-tap-leds</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/speaker-tap-leds.webp</image:loc>
</image:image>
<video:video>
<video:title>🔊 Tap This Speaker and It Makes Its Own Electricity</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/SQgJWICkOAA/hqdefault.jpg</video:thumbnail_loc>
<video:description>A speaker works backwards: move its cone and the coil makes a voltage. Push the cone in and a red LED flashes; let go and the cone springs back and a green LED flashes. There is no battery, and it is not free energy: the finger does all the work.</video:description>
</video:video>
<lastmod>2026-11-06</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/winch-interlock</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/winch-interlock.webp</image:loc>
</image:image>
<video:video>
<video:title>🔒 This Winch Ignores REVERSE While You Hold FORWARD</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/6VbjkbQ3UFg/hqdefault.jpg</video:thumbnail_loc>
<video:description>Hold FORWARD and the winch pulls the car up the ramp. Press REVERSE at the same time and nothing happens. Let go and the winch stops; hold REVERSE and the car rolls back down while FORWARD is locked out.</video:description>
</video:video>
<lastmod>2026-11-01</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/porch-pirate-siren</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/porch-pirate-siren.webp</image:loc>
</image:image>
<video:video>
<video:title>🚨 Lift This Parcel and It Keeps Screaming | One Relay, No Arduino</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Fq-h5zkJVxo/hqdefault.jpg</video:thumbnail_loc>
<video:description>Lift the parcel and a siren sounds with red and blue strobe flashes. Put it back down and it keeps going, because one relay holds itself on. It stops only when the owner flips the ARM switch off.</video:description>
</video:video>
<lastmod>2026-11-02</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/magnet-opens-hatch</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/magnet-opens-hatch.webp</image:loc>
</image:image>
<video:video>
<video:title>🧲 A Magnet Near This Glass Switch Pops the Hatch Open (No Arduino)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/q5CxmZps6Pg/hqdefault.jpg</video:thumbnail_loc>
<video:description>A magnet on a chain swings up beside a glass reed switch. The switch closes, the solenoid pulls and a small oak door slides aside to show a key. When the magnet swings away a spring shuts the door again.</video:description>
</video:video>
<lastmod>2026-11-04</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/door-handle-touch-alarm</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/door-handle-touch-alarm.webp</image:loc>
</image:image>
<video:video>
<video:title>🚨 Touch This Door Handle and the Alarm Goes Off</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/J3QSgrjnE14/hqdefault.jpg</video:thumbnail_loc>
<video:description>While a hand holds the metal door handle, a red strobe siren flashes and wails. The moment the hand lets go it falls silent.</video:description>
</video:video>
<lastmod>2026-11-06</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/squirrel-spin-feeder</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/squirrel-spin-feeder.webp</image:loc>
</image:image>
<video:video>
<video:title>🐿️ Squirrel Hops On, the Perch Spins, It Gives Up | NE555</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/v8Jw5URNYyY/hqdefault.jpg</video:thumbnail_loc>
<video:description>A squirrel hops onto the feeder's perch ring and the ring starts to turn. The squirrel lets go and hops onto a post, and about two seconds after it climbed on, the ring stops. A small cardinal can eat on the same ring and nothing moves, because it is too light to start it. No code and no microcontroller.</video:description>
</video:video>
<lastmod>2026-11-01</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/joystick-led-radar</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/joystick-led-radar.webp</image:loc>
</image:image>
<video:video>
<video:title>🌈 Spin the Stick and the Whole Ring Changes Colour | Arduino LED Ring</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/_UMaB0b5Wzs/hqdefault.jpg</video:thumbnail_loc>
<video:description>Turn the joystick in a circle and the whole ring runs through the colour wheel. The angle of the stick sets the colour of all 16 LEDs, dimly. The LED at the stick angle is brighter, with one more trailing behind it, so the sweep still reads. Turn the stick the other way and the sweep and the colours reverse with it.</video:description>
</video:video>
<lastmod>2026-11-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/one-switch-reverse</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/one-switch-reverse.webp</image:loc>
</image:image>
<video:video>
<video:title>🔄 One Plain Switch Reverses This Motor (2 Battery Packs, No Relay)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/QMSJPzSLmUM/hqdefault.jpg</video:thumbnail_loc>
<video:description>The wheel spins one way, the lever flips, and the same wheel spins back the other way. The moving dots on the wires jump from the left battery pack to the right one. There is no relay and no driver, only one three-lug toggle switch.</video:description>
</video:video>
<lastmod>2026-11-06</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/advent-candle-arc</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/advent-candle-arc.webp</image:loc>
</image:image>
<video:video>
<video:title>🕯️ Rechargeable Arc Lighter Lights the Advent Candles | 18650</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/0lm88VVvwHI/hqdefault.jpg</video:thumbnail_loc>
<video:description>Press and hold the button and a small electric arc snaps between two pins. A wick held between the pins catches fire about a third of a second later. Let go of the button and the arc stops. There is no match and no gas, and the cell charges from a USB cable.</video:description>
</video:video>
<lastmod>2026-11-02</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/regen-brake-wheel</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/regen-brake-wheel.webp</image:loc>
</image:image>
<video:video>
<video:title>⚡ Why Electric Cars Make Power When They Brake</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/NomrYXs4po4/hqdefault.jpg</video:thumbnail_loc>
<video:description>A small wheel spins on a motor while the switch is on RUN. Flip the switch to BRAKE and the battery is out of the circuit, but the wheel keeps turning and the same motor lights a red LED. The light fades as the wheel slows down.</video:description>
</video:video>
<lastmod>2026-11-04</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/capacitor-blink-relay</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/capacitor-blink-relay.webp</image:loc>
</image:image>
<video:video>
<video:title>⏱️ Bigger Capacitor, Slower Blink: This Relay Switches Itself</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/H9mMcD9qS5w/hqdefault.jpg</video:thumbnail_loc>
<video:description>A 12 V bulb blinks fast, with nothing telling it when. Press the ADD switch and the bulb blinks about three times slower. There is no chip and no transistor: the relay switches itself, and the capacitor decides how long each blink takes.</video:description>
</video:video>
<lastmod>2026-11-05</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/power-window-rocker</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/power-window-rocker.webp</image:loc>
</image:image>
<video:video>
<video:title>🚗 Press the Switch, the Car Window Slides Down (No Relay)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/STess3sot8Y/hqdefault.jpg</video:thumbnail_loc>
<video:description>Press one end of the little rocker switch and the car window slides down. Press the other end and it slides back up. Let go and it stops at once. There is no chip and no relay in this circuit, just the switch, a fuse, a battery and the motor.</video:description>
</video:video>
<lastmod>2026-11-07</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/knock-door-lock</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/knock-door-lock.webp</image:loc>
</image:image>
<video:video>
<video:title>🚪 Knock the Secret Rhythm and the Door Unlocks</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/OfI7_cfISHU/hqdefault.jpg</video:thumbnail_loc>
<video:description>Knock the secret rhythm on the door and the deadbolt turns for you. A wrong rhythm gets a red light and a small servo twitch, and the bolt stays shut. Both arms full of groceries and no hand free for the keys: the knock opens it.</video:description>
</video:video>
<lastmod>2026-10-31</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/jog-hold-relay</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/jog-hold-relay.webp</image:loc>
</image:image>
<video:video>
<video:title>🔁 JOG or HOLD: One Switch Decides If This Motor Keeps Running</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/-g-8TwuQOfI/hqdefault.jpg</video:thumbnail_loc>
<video:description>The same START button gives two results. On JOG the motor runs only while you hold START. On HOLD one tap keeps it running until you press STOP.</video:description>
</video:video>
<lastmod>2026-10-31</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/pill-dispenser</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/pill-dispenser.webp</image:loc>
</image:image>
<video:video>
<video:title>💊 It Drops Grandpa's Pill at 8:00, Every Single Day</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/XEoc40y74Xo/hqdefault.jpg</video:thumbnail_loc>
<video:description>At 8:00 a chime sounds, the wheel turns one slot and a single white tablet drops into the cup. You take it and press TAKEN, and the machine waits for tomorrow's 8:00. It is a demo with plain tablets.</video:description>
</video:video>
<lastmod>2026-10-28</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/pir-motion-light</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/pir-motion-light.webp</image:loc>
</image:image>
<video:video>
<video:title>💡 PIR Motion Sensor Light with TIP120</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/i6tEn-g7ROs/hqdefault.jpg</video:thumbnail_loc>
<video:description>Wave a hand over the PIR sensor and a 12 V lamp turns on, counts down about 3.5 seconds, then switches itself off.</video:description>
</video:video>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/seven-segment-counter</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/seven-segment-counter.webp</image:loc>
</image:image>
<video:video>
<video:title>🔢 7-Segment Counter With a Button: No Arduino (CD4026)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Ujfi9-j2izA/hqdefault.jpg</video:thumbnail_loc>
<video:description>A 9 V battery, one CD4026 chip and a push button count up on a seven-segment display. Each press of COUNT adds one (0, 1, 2, 3, 4) and RESET goes back to 0. No Arduino and no code.</video:description>
</video:video>
<lastmod>2026-10-21</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/dog-ball-launcher</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/dog-ball-launcher.webp</image:loc>
</image:image>
<video:video>
<video:title>🐕 Drop the Ball In and This Launcher Throws It for Your Dog</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/HXbwXZCDNZ8/hqdefault.jpg</video:thumbnail_loc>
<video:description>A beagle drops a foam ball into the funnel on top and this launcher throws it back across the lawn. The dog fetches it and drops it in again, with nobody holding the ball.</video:description>
</video:video>
<lastmod>2026-10-27</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/barrier-gate</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/barrier-gate.webp</image:loc>
</image:image>
<video:video>
<video:title>🚧 Smart Barrier Opens Automatically with Arduino and IR Sensor</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Y4uhszK81wk/hqdefault.jpg</video:thumbnail_loc>
<video:description>A toy car drives under an IR sensor, the green LED comes on and a servo swings the barrier open. Two seconds after the car has gone the barrier closes and the red LED returns.</video:description>
</video:video>
<lastmod>2026-10-14</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/servo-switch-fight</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/servo-switch-fight.webp</image:loc>
</image:image>
<video:video>
<video:title>🥊 Two Servos Fight Over One Switch | Arduino Useless Servos</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/v2IRGY1DQzk/hqdefault.jpg</video:thumbnail_loc>
<video:description>One switch, one LED and two servos that disagree. The orange arm keeps turning the light on, the blue arm keeps turning it off, and every push of the round comes faster than the last.</video:description>
</video:video>
<lastmod>2026-10-31</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/speakers-series-parallel</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/speakers-series-parallel.webp</image:loc>
</image:image>
<video:video>
<video:title>🔊 Speakers in Series vs Parallel: 16 Ω or 4 Ω?</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/ErABdGBryyw/hqdefault.jpg</video:thumbnail_loc>
<video:description>Two 8 ohm speakers on one amplifier. Wired in series the amplifier sees 16 ohm (0.62 A) and each speaker gets 3.1 W. Flip them to parallel and the amplifier sees 4 ohm (2.49 A) and each speaker gets 12.4 W.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/helmet-visor</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/helmet-visor.webp</image:loc>
</image:image>
<video:video>
<video:title>🏍️ This Helmet Closes Its Own Visor the Moment You Put It On</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/s5n8dOiTMSU/hqdefault.jpg</video:thumbnail_loc>
<video:description>You lower the helmet onto your head and the visor swings down by itself. Lift the helmet off and it swings back up. It is a demo, not a certified helmet.</video:description>
</video:video>
<lastmod>2026-10-29</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/led-chaser</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/led-chaser.webp</image:loc>
</image:image>
<video:video>
<video:title>💡 LED Chaser Circuit Using 3 Transistors (No IC)</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/4xRq0JI2Yrg/hqdefault.jpg</video:thumbnail_loc>
<video:description>Turning the knob anticlockwise speeds up the running light on nine LEDs, from about 0.5 s to 0.2 s per step. Turned back, it slows.</video:description>
</video:video>
<lastmod>2026-10-15</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/music-vu-meter</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/music-vu-meter.webp</image:loc>
</image:image>
<video:video>
<video:title>🔊 LEDs That Jump to the Beat | LM3914 VU Meter</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/i2V5gCZkbt8/hqdefault.jpg</video:thumbnail_loc>
<video:description>An LM3914 drives a bar of ten LEDs from a small microphone, so the tower jumps with every bass kick. Louder sound lights more LEDs, from the bottom up.</video:description>
</video:video>
<lastmod>2026-10-19</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/plant-no-arduino</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/plant-no-arduino.webp</image:loc>
</image:image>
<video:video>
<video:title>🌱 No Arduino: One MOSFET Waters This Plant When the Soil Dries</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Z2VCBHLcmlg/hqdefault.jpg</video:thumbnail_loc>
<video:description>Two steel rods in the soil decide when the pump runs. Wet soil keeps the MOSFET off and the pump rests. When the soil dries, the MOSFET turns on and the pump waters the pot. When the soil is wet again, the pump stops.</video:description>
</video:video>
<lastmod>2026-11-08</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/induction-heater-v2</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/induction-heater-v2.webp</image:loc>
</image:image>
<video:video>
<video:title>🔥 This 12V Coil Turns Steel Red Hot | ZVS Induction Heater</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/_mAk2KmKDsM/hqdefault.jpg</video:thumbnail_loc>
<video:description>A 12 V supply drives a coil with two MOSFETs and a capacitor. The coil and the capacitor ring together at about 150 kHz. The changing field heats a steel rod inside the coil until it glows. This is a ZVS (Mazzilli) driver.</video:description>
</video:video>
<lastmod>2026-10-18</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/tyre-pump-stops-at-35</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/tyre-pump-stops-at-35.webp</image:loc>
</image:image>
<video:video>
<video:title>🚗 This Tire Pump Stops Itself at 35 psi</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/HQC--Ko-HUc/hqdefault.jpg</video:thumbnail_loc>
<video:description>A pressure switch on the tyre valve tells the pump when to stop and when to start again. The pump stops at 35 psi (2.4 bar). If a slow leak lets the pressure fall, the pump starts again at the switch's lower point (assumed 30 psi). There is no chip and no screen.</video:description>
</video:video>
<lastmod>2026-11-07</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/buzz-wire-game</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/buzz-wire-game.webp</image:loc>
</image:image>
<video:video>
<video:title>〰️ Touch the Wire and It Buzzes: Steady Hand Game</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/6C8OAZuvzRc/hqdefault.jpg</video:thumbnail_loc>
<video:description>The whole game is one switch: the loop and the bent wire. While they stay apart nothing happens. The moment they touch, the circuit closes, the red LED lights and the buzzer sounds.</video:description>
</video:video>
<lastmod>2026-11-07</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/repost-dimmer</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/repost-dimmer.webp</image:loc>
</image:image>
<video:video>
<video:title>Does a Bigger Resistor Make the LED Dimmer?</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/B1zuJVb321g/hqdefault.jpg</video:thumbnail_loc>
<video:description>A red LED, a resistor and a 5 V supply sit in one loop. A bigger resistor lets less current through, so the LED gets dimmer. A smaller one makes it brighter.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/water-wheel-gutter-lamp</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/water-wheel-gutter-lamp.webp</image:loc>
</image:image>
<video:video>
<video:title>🌧️ The Harder It Rains, the Brighter This Light Gets</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/2GEThLlm0cA/hqdefault.jpg</video:thumbnail_loc>
<video:description>Water from a gutter downpipe turns a paddle wheel. The wheel turns a small gear motor backwards, and the motor works as a generator. It lights a yellow LED through a resistor. The faster the wheel turns, the brighter the LED glows. The circuit has no battery.</video:description>
</video:video>
<lastmod>2026-11-06</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/bottle-conveyor-filler-v2</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/bottle-conveyor-filler-v2.webp</image:loc>
</image:image>
<video:video>
<video:title>🏭 A Sensor Stops the Belt and Fills Each Bottle | Arduino</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/BQWFY3BMm-c/hqdefault.jpg</video:thumbnail_loc>
<video:description>A belt brings an empty bottle. An infrared sensor sees the white ring on its neck and the Arduino lets go of a relay. The belt stops with the bottle under the nozzle and the pump fills it. After 3.84 seconds the relay pulls in again, the pump stops and the belt carries the full bottle away.</video:description>
</video:video>
<lastmod>2026-11-09</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/reed-door-alarm</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/reed-door-alarm.webp</image:loc>
</image:image>
<video:video>
<video:title>🚨 Reed Switch Door Alarm with BC547 and Buzzer</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/LyMwTrLOhfc/hqdefault.jpg</video:thumbnail_loc>
<video:description>A magnet next to the reed switch means the door is closed, and the circuit is silent. Pull the magnet away and the buzzer sounds and a red LED lights. Put the magnet back and the alarm stops. A BC547 transistor drives the buzzer and the LED.</video:description>
</video:video>
<lastmod>2026-10-17</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/hand-crank-generator</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/hand-crank-generator.webp</image:loc>
</image:image>
<video:video>
<video:title>⚡ DC Motor Generator Experiment</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/TuLilXpFgAU/hqdefault.jpg</video:thumbnail_loc>
<video:description>A hand turns a crank on a small TT gear motor. The motor works as a generator and makes about 3.7 V. A diode and three 100 ohm resistors feed three LEDs (red, yellow, green), and a meter on the rail reads about 3 V.</video:description>
</video:video>
<lastmod>2026-10-17</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/touch-switch-lamp</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/touch-switch-lamp.webp</image:loc>
</image:image>
<video:video>
<video:title>👆 Touch Switch Lamp: One Tap ON, Next Tap OFF</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/s6SpIyetDqs/hqdefault.jpg</video:thumbnail_loc>
<video:description>A finger taps a red TTP223 touch pad. A relay clicks and a 12 V lamp turns on and stays on. The next tap turns it off. One 12 V battery runs the whole circuit.</video:description>
</video:video>
<lastmod>2026-10-18</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/touchless-soap-dispenser</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/touchless-soap-dispenser.webp</image:loc>
</image:image>
<video:video>
<video:title>🧼 Hand Under the Nozzle, Foam Lands in Your Palm</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/BzRcajrnB5k/hqdefault.jpg</video:thumbnail_loc>
<video:description>You hold a hand under the nozzle. An infrared sensor sees the palm and switches a MOSFET on. The MOSFET runs a small gear motor. A cam on the motor shaft presses the foam pump once per turn, so foam drops into your hand. Take the hand away and the motor stops.</video:description>
</video:video>
<lastmod>2026-11-10</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/washer-wobble-stop</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/washer-wobble-stop.webp</image:loc>
</image:image>
<video:video>
<video:title>🧺 Unbalanced Load: the Washer Stops Its Own Spin</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/BBpWl4_9vmI/hqdefault.jpg</video:thumbnail_loc>
<video:description>A heavy load sticks to one side of the drum and the washer rocks harder and harder. At the biggest lean a ball switch on top closes and cuts the motor. The drum coasts down and the washer settles. About one and a half seconds after the last tick of the switch, the motor starts again by itself.</video:description>
</video:video>
<lastmod>2026-11-11</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/cookie-jar-lid-alarm</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/cookie-jar-lid-alarm.webp</image:loc>
</image:image>
<video:video>
<video:title>🍪 Lift the Cookie Jar Lid and It Tells On You</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/olvvuYL4p1w/hqdefault.jpg</video:thumbnail_loc>
<video:description>A little lever under the glass lid keeps this cookie jar quiet. Lift the lid and a red lamp and a buzzer start at once. Put the lid back and both stop. There is no chip, no transistor and no magnet.</video:description>
</video:video>
<lastmod>2026-11-09</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/ski-lift-stop-gate</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/ski-lift-stop-gate.webp</image:loc>
</image:image>
<video:video>
<video:title>⛷️ Miss the Exit and the Whole Ski Lift Stops</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/Ft3LnskqERA/hqdefault.jpg</video:thumbnail_loc>
<video:description>One rider stays seated at the top. His skis push the stop bar and the whole lift stops at once. The bar rests on a small lever switch, and the motor only gets power while the lever is pressed. Push the bar, the lever springs out and the motor stops. When the bar falls back, the motor runs again.</video:description>
</video:video>
<lastmod>2026-11-10</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/wireless-power-transfer</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/wireless-power-transfer.webp</image:loc>
</image:image>
<video:video>
<video:title>⚡ Wireless Power Transfer Circuit | BC547 + Coils</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/1fnYT5iCiYY/hqdefault.jpg</video:thumbnail_loc>
<video:description>One BC547 makes a coil oscillate at about 1 to 1.2 MHz. A second 30-turn coil with a green LED lights up when you bring it close, with no wire between the two. The range is millimetres to about 3 cm.</video:description>
</video:video>
<lastmod>2026-10-13</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/usb-c-pd-20v-motor</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/usb-c-pd-20v-motor.webp</image:loc>
</image:image>
<video:video>
<video:title>⚡ Press One Tiny Button: the USB-C Charger Jumps From 5 V to 20 V</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/tw2RKhdfTc0/hqdefault.jpg</video:thumbnail_loc>
<video:description>A USB-C charger gives 5 V until something asks for more. Press the trigger board's button and it asks for 9 V, then 15 V, then 20 V, and the motor on its screws speeds up at every step. One more press goes back to 5 V.</video:description>
</video:video>
<lastmod>2026-11-11</lastmod>
</url>
<url>
<loc>https://wirecora.com/circuits/capacitor-backwards-12v</loc>
<image:image>
<image:loc>https://wirecora.com/project-art/circuits/capacitor-backwards-12v.webp</image:loc>
</image:image>
<video:video>
<video:title>Wired Backwards on 12 V: the Capacitor Bursts Open</video:title>
<video:thumbnail_loc>https://i.ytimg.com/vi/iCO__kXaum8/hqdefault.jpg</video:thumbnail_loc>
<video:description>Two capacitors on the same 12 V. The one with its stripe on minus just charges and sits there. The one turned round lets current leak through, gets hot, and its vent on top tears open.</video:description>
</video:video>
<lastmod>2026-11-14</lastmod>
</url>
<url>
<loc>https://wirecora.com/practice</loc>
<lastmod>2026-10-08</lastmod>
</url>
<url>
<loc>https://wirecora.com/practice/daily</loc>
<lastmod>2026-10-08</lastmod>
</url>
<url>
<loc>https://wirecora.com/practice/smd</loc>
<lastmod>2026-11-06</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts</loc>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/bc547-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/bc547-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/bc557-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/bc557-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/bc337-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/bc337-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/bc327-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/bc327-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/2n2222a-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/2n2222a-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/2n3904-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/2n3904-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/2n3906-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/2n3906-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/s8050-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/s8050-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/s8550-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/s8550-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/2n7000-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/2n7000-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/tip31c-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/tip31c-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/tip120-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/tip120-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/irfz44n-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/irfz44n-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/irlz44n-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/irlz44n-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/irf540n-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/irf540n-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/7805-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/7805-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/7812-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/7812-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/7905-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/7905-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/parts/lm317-pinout</loc>
<image:image>
<image:loc>https://wirecora.com/parts/lm317-pinout/picture.svg</image:loc>
</image:image>
<lastmod>2026-10-16</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/68-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/100-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/120-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/150-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/220-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/270-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/330-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/470-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/560-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/680-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/820-ohm-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/1k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/1-5k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/1-8k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/2-2k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/2-7k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/3-3k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/3-9k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/4-7k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/5-6k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/6-8k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/8-2k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/10k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/12k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/15k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/18k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/22k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/27k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/33k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/39k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/47k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/56k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/68k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/82k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/100k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/150k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/220k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/330k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/470k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/680k-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/1m-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/2-2m-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
<url>
<loc>https://wirecora.com/values/10m-resistor-color-code</loc>
<lastmod>2026-10-26</lastmod>
</url>
</urlset>
